LSP (8017)

Are recommended for:
  • General and local lighting of the working zones of the premises with normal environment, zones with increased humidity and dust level of commercial, industrial and public buildings, offices, administrative buildings and educational institutions, halls of commercial establishments;
  • Background illumination of shop windows, expositions, stands;
  • Use at infant schools, schools and other educational establishments, since the bulb of the luminaires can be covered with decorative lattice which ensures safe and non-dazzling lighting.
Hospital system (SB 8613) is designed for general and local lighting, power supply of hand held medical equipment, network connect of radio and telephones in the hospital rooms.
It can be produced with gas supply unit, oxygen humidifier and remote control with medical staff call button by request.
Fluorescence luminaires are being produced in suspension-type and ceiling versions. High-quality lighting is being achieved due to possibility to fix the luminaires at any height, even close above the working place. The luminaire’s design enables to change the direction of luminous flux of each lamp by rotating the reflector by 360o which considerably increases the efficiency of its use and enables to use this luminaire  as the reflected light source with maximum comfort for human’s eyes.
The LSP luminaires are being produced in black and white colour versions. The luminaires are being equipped with decorative plastic lattice and protective metal lattice (for use in sports buildings) on demand.
The reflector can be produced of stainless speculum. The luminaires of 8015 and 8117 series are being produced with non-rotatable reflector.
Electromagnetic starting regulator devices and electronic starting regulator devices can be installed in the luminaires. The luminaires with electronic starting regulator devices have the following advantages:
  • Efficiency is increased by 20%, due to high-frequency functioning of fluorescence light sources;
  • 30% energy saving as compared with electromagnetic starting regulator devices and six times over energy saving as compared with the similar incandescent lamp;
  • Service life is increased by 20% and more due to its optimum performance;
  • Guarantee instant switching on without extra starter and silence in operation;
  • Steady lighting, no blinking, no eye-sight fatigue, due to high-frequency functioning of fluorescence lamps;
  • Absence of stroboscopic effect;
  • Operational capability with direct voltage curcuit in reserve (spare) plants; (220 – 250 V);
  • Absence of electromagnetic interferences;
  • Protection against interferences in switch on/switch off modes, because of overvoltage or because of switching off a powerful energy consumer.
The LSP luminaires are being produced with IP 20 and 5/4 protection levels as per GOST 17677 and can operate with the following operating temperature range: -150C…+500C. The luminaires with 5/4 protection level can be used in explosive zones B-I and B-II a classes and in fire risk zones.
Варианты исполнения светильника 8017
Исполнение светильника
Мощность, Вт
Степень защиты
Класс защиты
Корпус
светильника
Пускорегулирующий
аппарат (ПРА)
17
58
5'4
I
стальная труба
цвет - белый
ЭПРА
20
36
5'4
стальная труба
цвет - черный
ЭПРА
22
стальная труба
цвет - белый
23
IP20
24
58
5'4
стальная труба
цвет - черный
ЭПРА
26
стальная труба
цвет - белый
27
IP20
33
36
5'4
II
пластмассовая труба
цвет - серый
ЭПРА
37
58
ЭПРА 
 
Технические характеристики
Тип светильника
ЛСП 10-36-801
ЛСП 10-36-801
ЛСП 10-58-801
ЛСП 10-58-801
Тип применяемых ламп
люминесцентная лампа Т8 Ø26 мм
Мощность источника света, Вт
36
58
Количество источников света, шт.
1
Мощность, потребляемая из сети, не более, Вт
43
65
Класс защиты от поражения электр. током по ГОСТ12.2.007.0-75
I
II
I
II
Степень защиты от воздействия окружающей среды по ГОСТ 14254-96
5¢4
IP20
5¢4
5¢4
IP20
5¢4
Длина, мм
1350
1650
Ширина, мм
82
Высота, мм
190
Масса, кг
4,7
2,3
5,2
2,6
  • Order product

  • Feedback